$8.00

Metal trunnion of regular szie 90 rotate retract -- for upgrade

Metal trunnion of regular szie 90 rotate retract -- for upgrade
This item was pre-installed as picture.


It is consisted the follwoing parts. Metal trunnins; 4mm strut wires; side pin; and collars


This metal trunnion not only able use for 90 rotate retract, as well as use as normal trunnion of convensional retract, as long as you use a set screw fix the strut wire to lock it not be moving.


It also able use for steerable retract trunnion as long as use a steering arm with e-clip fixing the strut wire (not included)


The side pin come with this upgrade kit is use screw thread fixing to the strut wire, it is more easy for install to the strut wire.


If you use it for the regular size 90 rotate retract. It is very easy to replace the original plastic trunnion. Open the housing, take away the plastic trunnion with the original strut wire, place it to the retract then reassemble it.


For some retrcts which included plastic scale looking wheel strut, like FMS F4U, P40, F6F, it is a bit of tricky but possible. You can not use the upgrade strut wire and side pin, because the plastic scale looking wheel strut is unable transfer. Thus you need to use the original strut wire.
In the picture below, you can see the side pin is not use screw thread, you need to pull it out form the strut wire first.


After remove the original side pin. Fix a collar before insert it to the metal trunnion. Afterward, insert the side pin back to the wheel strut.
The collar is very important, it is act as a stopper to avoid damage the retract unit when landing.


Reviews

1 x Change Sun 50mm V2 4200Kv EDF Power Unit (11 Blade)
1 x XRP-70mm 13blade EDF Fan Unit
1 x Change Sun 70mm Ducted Fan (12 Blade)
1 x Supreme Hobbies 90mm EDF 1500Kv (13 Blade) For 6S
1 x Supreme Hobbies 90mm Ducted Fan (13 Blade)
2 x ChangeSun 50mm 11 blades ducted fan unit
2 x XRP 50mm 11 blades ducted fan unit
1 x Lander Bea Hawk Lighting System With 60mm After Burner
1 x XRP RC Aircraft and Helicopter LED Control System
1 x Radiolink T6EAP 2.4G transmitter with receiver
2 x Lander F16 Lighting System With 81mm After Burner
2 x S.H. A330 / A340 Lighting System
1 x Supreme Hobbies gear door sequencer
1 x 3 x 1170 Two blade propeller
1 x 3 x 1109 three blade propeller of FMS 1400mm Cessna 182
1 x Three blade propeller with spinner of FMS 0.98M KI61
1 x 3 set 1390 three blade prop
1 x 3 x Spinner for the three blade propeller of FMS 1.4M Cessna 182
1 x 3 x Three blade spinner for 8 inches 3 blade prop
1 x 5 x 1070 thee blade propeller
2 x S.H. A320 4.5g Elevator Servo - Reverse
1 x S.H. A330 / A340 Rudder Part
2 x S.H. A330 / A340 9g Slow Motion Flap Servo - Reverse L:290mm
1 x S.H. A340 Nacelle Set
2 x S.H. A330 / A340 9g Metal Gear Aileron Servo - Normal
2 x S.H. A330 / A340 9g Metal Gear Main Gear Door Servo - Reverse
1 x Supreme Hobbies A320 Main Fuselage
2 x S.H. A340 9g Slow Motion Flap Servo - Normal L:290mm
2 x S.H. A320 4.5g Rudder Servo - Normal
2 x S.H. A330 / A340 Electric Retract Nose Landing Gear Set
1 x S.H. A330 / A340 Elevator Part
1 x S.H. A330 Nacelle Set
2 x S.H. A340 9g Slow Motion Flap Servo - Reverse L:450mm
1 x Cowling of FMS 1100 mm J3 -- MR303
1 x Supreme Hobbies A320 Main Wing Set
2 x S.H. A330 / A340 9g Metal Gear Elevator Servo - Reverse
2 x S.H. A330 / A340 Electric Retract Main Landing Gear Set
2 x S.H. A320 4.5g Aileron Servo - Normal
2 x S.H. A330 / A340 9g Metal Gear Main Gear Door Servo -Normal
2 x S.H. A330 Electric Retract Landing Gear Set
1 x S.H. A340 Nacelle Part - 1 PC
2 x S.H. A330 / A340 9g Metal Gear Elevator Servo - Norma
2 x S.H. A330 / A340 Electric Retract Nose Gear Base
2 x S.H. A320 4.5g Nose Gear Steering Servo - Reverse
2 x S.H. A330 / A340 Electric Retract Main Gear Base
2 x S.H. A320 4.5g Nose Gear Door Servo - Normal
2 x S.H. A320 4.5g Elevator Servo - Normal
2 x S.H. A320 4.5g Main Gear Door Servo - Reverse
1 x S.H. A330 / A340 Main Fuselage Part
1 x S.H. A330 MRTT Decal Set
2 x S.H. A330 / A340 9g Nose Gear Door Servo - Reverse
1 x Supreme Hobbies A320 Tail Wing Set
1 x S.H. Hobbies A330 Nacelle Part - 1 PC
2 x S.H. A330 / A340 9g Metal Gear Rudder Servo - Reverse
2 x S.H. A320 4.5g Main Gear Door Servo - Normal
2 x S.H. A330 / A340 9g Slow Motion Flap Servo - Normal L:450mm
1 x S.H. A330 / A340 Main Wing Part
2 x S.H. A330 / A340 9g Nose Gear Steering Servo - Reverse
1 x 3 x Motor shaft adaptor 005 for 3 mm motor shaft
1 x PW-RC B-17 Resin Machine gun set
1 x 3 x Motor shaft adaptor 004 for 3.17 mm motor shaft
1 x Pilot figure 001
1 x FMS 1.4M B25 1000KV motor--MD201
1 x Cyclone Power CS480-2800 -3.17 EDF Motor - Free Shipping !
1 x FMS 3536-KV750 motor
1 x 4300 kv in runner motor with heat sink
1 x FMS 3536-KV850 motor
1 x XRP 90mm 14blade 1450kv Outrunner Brushless Motors
1 x FMS 4250 500Kv Outrunner Brushless Motor
1 x Cyclone Power CS480-4100-3.17 EDF Motor - Free Shipping !
1 x Cyclone Power CS480-3700-3.17 EDF Motor - Free Shipping !
1 x Dynam 3715-900KV motor
2 x A pair of 65mm PU wheels
2 x A pair of 45mm PU wheels
2 x 75 mm PU wheels set
2 x Metal gear 13KG torque 360 degree Continuous Rotation servo
2 x 4 pcs of 30mm PU whees
1 x Cyclone Power CS480-2800 -4mm EDF Motor - Free Shipping !
1 x pw-rc B17 motor 920KV
1 x 2627S 4200kv 4S Motor For Supreme Hobbies Air Bus C.S. and XRP 5
1 x Supreme Hobbies Super Scale A330 MRTT Twin 50mm EDF Plane PNP
1 x Servo extension wire lock
1 x Multiple battery charging board
1 x Worm gear of REGULAR size of common servoless retract 6.34 mm
1 x 2 x metal trunnion (4mm) of common servoless retract--Regular
1 x Left side retract with door servo of FMS B25 MD306L
1 x Right side retract with door servo of FMS B25 MD306R
1 x 2 x metal trunnion (3mm) of common servoless retract--Regular
1 x Wheel strut with tyre of FMS B25 MD306
1 x Regular size common servoless retract--4 mm hole Metal trunnions
1 x Metal trunnion of regular szie 90 rotate retract -- for upgrade
1 x Metal trunnion of LARGE szie 90 rotate retract -- for upgrade
1 x Lander Full Metal Electric Retract without wheel strut
1 x Worm gear of Large size of common servoless retract
1 x 85 degree servoless retract
1 x Wheel strut with tyre of FMS B25 MD306
1 x Regular size common servoless retract--3mm hole Metal trunnions
1 x 3 x Motor shaft adaptor 007 for 4 mm motor shaft
1 x 4 x Motor shaft adaptor 006 for 3 mm motor shaft
1 x 3 x Motor shaft adaptor 001 for 5 mm motor shaft
1 x Pilot figure 004
1 x Pilot figure 003
1 x 2 x Motor shaft adaptor 003 for 5 mm shaft with spinner nut
1 x 3 x Motor shaft adaptor 002 for 5 mm motor shaft
1 x Pilot Chubby Lady
1 x 3 x Motor shaft adaptor 008 for 3 mm motor shaft
1 x Float set for 1.9M airplanes
1 x FMS P-38 Multiple Connector -- MK208
$2,295.61
Share Product
Share via E-Mail
Share on Facebook Share on Twitter